the wire(hand和on)
资讯
2023-11-18
435
1. the wire,hand和on?
in my hand释义:
在我的手
例句:
Her eyes rested on the piece of paper in my hand.
她的目光落在我手里的一张纸上。释义:
在我的手
例句:
Her eyes rested on the piece of paper in my hand.
她的目光落在我手里的一张纸上。
on my hand释义:
在我的手上
例句:
I was bothered about the blister on my hand.
我为手上的水疱感到很心烦。
2. 人民币是国内的称呼?
应该叫中国元吧。
3. 打印机出现DustondrumCleanthecoronawirelo?
硒鼓上有灰尘,Clean the corona wire大意是让你清洁一些线。located on the Drnm这线是连接 Drnm的。打开打印机前挡板并移除硒鼓
4. wire是什么格式?
格式:
字母w, r, e占中间一格,字母i占上,中两格。
n. 电线;金属丝;电报
vt. 拍电报;给…装电线
vi. 打电报The young electrician quickly wired the room.
这个年轻的电工很快就安好了房间的电线。
Someone had cut the phone wires.
有人切断了电话线。
I'd like to make a wire transfer to a friend overseas.
我想给一个在国外的朋友转账。
What gauge of wire do we need?
我们需要多大直径的金属丝?
The wire led to a speaker.
这电线连接着扬声器。
5. 男生女生向前冲第一季背景音乐?
男生女生向前冲系列歌单:《Girls Generation》
《tim bar》
《动力全开》
《Wired》
《On the wire》
《活下去,这是命令》
《Takedown》
《Airplane》
《Deep space》
6. 220v的6000w用多少平方铝线?
要计算220V 6000W所需的铝线面积,我们需要知道导线的截面积。假设我们使用的是标准化的铝线,常见的截面积有1.2mm²、1.5mm²和2.5mm²等。首先,将6000W转换为千瓦时(kW),即6kW。然后将kW转换为千瓦(k),即6/1=6k。接下来,查找标准化的铝线截面积与功率的对应关系。通常情况下,每增加1kW的功率需要增加约3%的铝线截面积。因此,我们可以按照以下步骤估算所需的铝线截面积:
查找与6kW相对应的铝线截面积百分比增加量。例如,对于1.2mm²的铝线,当功率增加到4kW时,截面积增加了约58%。我们可以将这个百分比增加量乘以初始的铝线截面积来估算所需的新的铝线截面积。例如:对于初始的1.2mm²铝线,需要的总面积约为:总面积 = (1 + 58/100) * π * (R/r)² * L / S where R is the outer diameter of the aluminum wire and L is the length of the wire segment 总面积 = (1 + 58/100) * π * (R/r)² * L / ((I^(3/2)) / S)^(3/2) where I is the initial current density in Amps per mm^3, S is the initial sheet resistance of the aluminum wire in ohms per meter, and L is the length of the wire segment in meters 总面积 = (97+79)/2 * π * ((sqrt(R/r))^4 - R^4)/((I^(3/2)) / ((sqrt(S))^(3/2))) where R is the outer diameter of the aluminum wire and r is half of inner diameter of aluminum wire 总面积 = (97+79)/2 * π * ((sqrt(R/r))^4 - R^4)/((I^(3/2)) / ((sqrt((pi)*S)^(-3))) ) where I is an assumed initial current density in Amps per mm^3, S is an assumed initial sheet resistance of an aluminum wire in ohms per meter, and L is a length scale for a specific segment of the aluminum wire
我们可以看到,随着功率的增加,所需的铝线截面积会增加约58%。因此,对于6kW的功率,我们可以估算需要的铝线截面积为: ```makefile 总面积 = (1 + 58/100) * π * (R/r)² * L / ((I^(3/2)) / S)^(3/2) where I is an assumed initial current density in Amps per mm^3, S is an assumed initial sheet resistance of an aluminum wire in ohms per meter, and L is a length scale for a specific segment of the aluminum wire. 总面积 = (1 + 58/100) * π * ((sqrt(R/r))^4 - R^4)/((I^(3/2)) / ((sqrt((pi)*S)^(-3))) ) where R is the outer diameter of the aluminum wire and r is half of inner diameter of aluminum wire.
请注意,这个估算是基于一些假设和近似计算的。实际情况下,需要考虑更多的因素来确定所需的铝线截面积。此外,如果您能提供更多信息,例如您需要的是6000W还是7kW的功率密度,以及您所使用的铝线品牌和规格等
7. Wire?
火线英文front line、live wire。
本站涵盖的内容、图片、视频等数据系网络收集,部分未能与原作者取得联系。若涉及版权问题,请联系我们删除!联系邮箱:ynstorm@foxmail.com 谢谢支持!
1. the wire,hand和on?
in my hand释义:
在我的手
例句:
Her eyes rested on the piece of paper in my hand.
她的目光落在我手里的一张纸上。释义:
在我的手
例句:
Her eyes rested on the piece of paper in my hand.
她的目光落在我手里的一张纸上。
on my hand释义:
在我的手上
例句:
I was bothered about the blister on my hand.
我为手上的水疱感到很心烦。
2. 人民币是国内的称呼?
应该叫中国元吧。
3. 打印机出现DustondrumCleanthecoronawirelo?
硒鼓上有灰尘,Clean the corona wire大意是让你清洁一些线。located on the Drnm这线是连接 Drnm的。打开打印机前挡板并移除硒鼓
4. wire是什么格式?
格式:
字母w, r, e占中间一格,字母i占上,中两格。
n. 电线;金属丝;电报
vt. 拍电报;给…装电线
vi. 打电报The young electrician quickly wired the room.
这个年轻的电工很快就安好了房间的电线。
Someone had cut the phone wires.
有人切断了电话线。
I'd like to make a wire transfer to a friend overseas.
我想给一个在国外的朋友转账。
What gauge of wire do we need?
我们需要多大直径的金属丝?
The wire led to a speaker.
这电线连接着扬声器。
5. 男生女生向前冲第一季背景音乐?
男生女生向前冲系列歌单:《Girls Generation》
《tim bar》
《动力全开》
《Wired》
《On the wire》
《活下去,这是命令》
《Takedown》
《Airplane》
《Deep space》
6. 220v的6000w用多少平方铝线?
要计算220V 6000W所需的铝线面积,我们需要知道导线的截面积。假设我们使用的是标准化的铝线,常见的截面积有1.2mm²、1.5mm²和2.5mm²等。首先,将6000W转换为千瓦时(kW),即6kW。然后将kW转换为千瓦(k),即6/1=6k。接下来,查找标准化的铝线截面积与功率的对应关系。通常情况下,每增加1kW的功率需要增加约3%的铝线截面积。因此,我们可以按照以下步骤估算所需的铝线截面积:
查找与6kW相对应的铝线截面积百分比增加量。例如,对于1.2mm²的铝线,当功率增加到4kW时,截面积增加了约58%。我们可以将这个百分比增加量乘以初始的铝线截面积来估算所需的新的铝线截面积。例如:对于初始的1.2mm²铝线,需要的总面积约为:总面积 = (1 + 58/100) * π * (R/r)² * L / S where R is the outer diameter of the aluminum wire and L is the length of the wire segment 总面积 = (1 + 58/100) * π * (R/r)² * L / ((I^(3/2)) / S)^(3/2) where I is the initial current density in Amps per mm^3, S is the initial sheet resistance of the aluminum wire in ohms per meter, and L is the length of the wire segment in meters 总面积 = (97+79)/2 * π * ((sqrt(R/r))^4 - R^4)/((I^(3/2)) / ((sqrt(S))^(3/2))) where R is the outer diameter of the aluminum wire and r is half of inner diameter of aluminum wire 总面积 = (97+79)/2 * π * ((sqrt(R/r))^4 - R^4)/((I^(3/2)) / ((sqrt((pi)*S)^(-3))) ) where I is an assumed initial current density in Amps per mm^3, S is an assumed initial sheet resistance of an aluminum wire in ohms per meter, and L is a length scale for a specific segment of the aluminum wire
我们可以看到,随着功率的增加,所需的铝线截面积会增加约58%。因此,对于6kW的功率,我们可以估算需要的铝线截面积为: ```makefile 总面积 = (1 + 58/100) * π * (R/r)² * L / ((I^(3/2)) / S)^(3/2) where I is an assumed initial current density in Amps per mm^3, S is an assumed initial sheet resistance of an aluminum wire in ohms per meter, and L is a length scale for a specific segment of the aluminum wire. 总面积 = (1 + 58/100) * π * ((sqrt(R/r))^4 - R^4)/((I^(3/2)) / ((sqrt((pi)*S)^(-3))) ) where R is the outer diameter of the aluminum wire and r is half of inner diameter of aluminum wire.
请注意,这个估算是基于一些假设和近似计算的。实际情况下,需要考虑更多的因素来确定所需的铝线截面积。此外,如果您能提供更多信息,例如您需要的是6000W还是7kW的功率密度,以及您所使用的铝线品牌和规格等
7. Wire?
火线英文front line、live wire。
本站涵盖的内容、图片、视频等数据系网络收集,部分未能与原作者取得联系。若涉及版权问题,请联系我们删除!联系邮箱:ynstorm@foxmail.com 谢谢支持!